Posted on Jun 12 2013 - 3:05am by Anurag Kumar

No matter what Sony has released now android 4.1.2 Jelly Bean 6.2.B.0.211 firmware for Xperia S, SL and Acro S, though it was meant to fix all bugs but it didn’t. All the bugs which were present in Jelly Bean 6.2.B.0.200 firmware ares still there in Jelly Bean 6.2.B.0.211 firmware. So Sony just rolled out an update with the different build number nothing more 😛

If you haven’t installed the Jelly Bean 6.2.B.0.211 firmware yet, you can do it manually bu visiting below link.

How to Flash Xperia S, SL Jelly Bean 6.2.B.0.211 World-India ftf file ?

Manually Install Xperia S LT26i /SL/Acro S Jelly Bean 6.2.B.0.211 firmware ftf file – Official Update

Just like before XDA Recognized Developer DooMLoRD has released a Pre-Rooted Xperia S, SL Jelly Bean 6.2.B.0.211 ROM which can be flashed via CWM Recovery. If you want to root the Jelly Bean 6.2.B.0.211 firmware then flashing the above ROM is the best idea.

Xperia S LT26i Jelly Bean 6.2.B.0.211 firmware details

How to flash Pre-Rooted Xperia S, SL Jelly Bean 6.2.B.0.211 ROM via CWM recovery ?

The below mentioned ROM is only for Xperia S and SL. please do not cross flash it on Acro S LT26w. ROM can be flashed on both locked as well as unlocked bootloader phones.

Warnings

  • It is mandatory to perform a “Factory Data Reset” and “wiping all Data and Cache partitions”.
  • Do get a backup of your old ROM before proceeding to be on safe side.
  • Take a back up of your data also.

ROM features

  • You can easily flash “update.zip” via any recovery.
  • Pre-rooted SuperSU and BusyBox installed.
  • Working signed stock kernel included.

Download Pre-Rooted Xperia S , SL Jelly Bean 6.2.B.0.211 ROM

Download LT26-DooMLoRD-JB-211_prerooted.zip I 490 MB
MD5HASH: dc13c9cae9ce67a9a37cf8cee20d45ac

Installation Tutorial Guide

  • Download the above pre-rooted ROM and save it on your SD Card.
  • Reboot your phone into recovery (CWM).
  • Kindly check and make sure that /system partition is unmounted.
  • Now flash the “update.zip” from ROM (Time consuming process).
  • DooMLoRD has mentioned that during the first reboot, phone will reboot again after the boot animation.
  • Preceding boot will take more time, it is expected.
  • You may see “flashing firmware screen” during or after some boot, let is happen, do not interrupt the process in between.
  • It’s done now 🙂

ROM will be stabilized after some reboots.

Pre-Rooted Xperia S SL Jelly Bean 6.2.B.0.211 ROM Flash via CWM recovery

 If you face any issues during flashing do let us know, we will help you out 🙂 Drop your concerns in the comment section below. As people are reporting many bugs in Jelly Bean 6.2.B.0.211 firmware if you have some do mention below.

[ via – XDA ]


About the Author

Blogging as a hobby. Sales & Marketing Professional. MBA (IB) from IIFT Delhi (2015-17). Founder & Editor-in-Chief of GizmoBolt.com ( formerly XperiaGuide.com ) , TipsySafarnama.com & TipsyChai.com. Follow at Facebook I Twitter I Google Plus | LinkedIn | Instagram. Contact at [email protected] for feedback and sending tips. Donate Us.

12 Comments so far. Feel free to join this conversation.

  1. Naeel June 15, 2013 at 10:23 pm - Reply

    Hello , I have Xperia S with 6.2.B.0.211 installed without root , can i flash this pre-rooted version of the same version over this one ? if it is possible to do so , kindly mention how to do that using the CWM recovery , because i can’t get into recovery mode using any combination of keys !
    thanks in advance …

    • Anurag Kumar June 16, 2013 at 12:02 pm - Reply

      yes you can install pre-rooted version over this. Do back up your ROM in case anything goes wrong you can go back.
      Reboot your device into recovery. (CWM). To enter in recovery press “volume up” button again and again as soon you see “Pink” LED at boot up.
      Now flash the ROM’s “update.zip”. (time consuming step). “Wiping Data” in recovery is recommended.

      • Naeel June 16, 2013 at 4:25 pm - Reply

        sorry for asking alot but it really never comes to CWM mode , i tried what you said many times without any results , it always boots as normal ..
        is this because there is not a CWM recovery installed , if yes , how can i install it …
        it’s very important for me to flash this ROM because my current ROM is the crab update from Sony (The Wi-Fi issue ‘Cannot connect to any WLANs unless the Airplane mode is activated’ the fullHD recording issues and so on ….)
        I really will appreciate your help ..
        thanks in advance ..

        • Anurag Kumar June 16, 2013 at 4:55 pm - Reply

          Yes because it is CWM recovery not installed.

          I have corrected Wi-Fi issue on My XSL by “resetting the phone “factory reset”. It worked for me, don’t know will it work for you.

          For installing CWM refer here – http:// android.gs/install-clockworkmod-recovery-sony-xperia-s/

          Detailed steps can be found on above link for installing CWM.

          • Naeel June 16, 2013 at 6:43 pm -

            there is an error said that ‘Your Device must be rooted’ …. but i want to install CWM because i need to flash the DoomLord pre-rooted ROM … I don’t know but it seems impossible to do that >>>

          • Anurag Kumar June 16, 2013 at 6:44 pm -

            It’s necessary to have root buddy…you need to root your device then ?

          • Naeel June 17, 2013 at 4:59 am -

            so if I want to install this pre-rooted ROM , I need to root my ROM .. hmmmmm , I think that is going to make me crazy after all …. thank you very much Anurag for your patience … i intend to study the basic steps of programming Android Devices at my Phd thesis maybe next year , thanks alot ….

  2. niket bhanushali July 11, 2013 at 3:06 pm - Reply

    hey, i am thinkin to try another method without unlockimg bootloader, i downgraded back to ics, rooted it , downloaded the ota root keeper, and updating it … as the app says it can backup the root.. shall i go further ?? please reply as soon as you can?

    • Anurag Kumar July 11, 2013 at 7:14 pm - Reply

      Yes you can, it will not do any harm to your device..
      before doing this please make a nandroid backup of your phone…

  3. niket bhanushali July 11, 2013 at 7:59 pm - Reply

    I tried this method, after rooting the ota update is reaching till 99% and says could not download.. I know to install cwm on a locked bootloader, can I flash this rom on my locked bootlader having cwm on ics. 45 stock??

  4. saurabh January 5, 2014 at 9:17 pm - Reply

    Can roms for xperia s work on xperia sl?

  5. Sanjay July 23, 2015 at 2:35 am - Reply

    Hi Anurag,

    I have Xperia S LT26ii.. I have rooted by phone and then installed cwm recovery.

    1. It successfully installed it.
    2. Gone to recovery screen.
    3. Wiped all data & cache partition.
    4. Tried to installed the kitkat version using OpenSEMC-kk-beta3.zip.
    5. but it failed saying that this package is not for LT26ii.
    6. After that I rebooted the phone.

    Now the phone shows the Sony logo only and cannot boot further.

    Please assist/ help me to overcome this issue.

    Your early help will help me a lot.

    Thanks,
    Sanjay
    [email protected]

Leave A Response

*